1. 在Podfile加入
platform :ios, '7.0'
pod 'Masonry'
2. 运行pod install 进行安装
3. 在pch加入
// 只要添加了这个宏,就不用带mas_前缀
#define MAS_SHORTHAND
// 只要添加了这个宏,equalTo就等价于mas_equalTo
#define MAS_SHORTHAND_GLOBALS
// 这个头文件一定要放在上面两个宏的后面
#import "Masonry.h"
4.在Build Setting中设置
Precompile Prefix Header 为yes
设置Prefix Header 为创建的pch文件(路径要正确,可以用绝对路径,可以用$(SRCROOT)这些变量的)
如果有错误检查一下添加的路径是否正确。(假如你写的时$(SRCROOT)这个开头的,那就建在根目录下,如果是$(PROJECT_DIR),那就无所谓了)
5. 运行 build
6. 在代码中使用
UIView *sv=[UIViewnew];
[sv mas_makeConstraints:^(MASConstraintMaker *make) {
///TODO 添加约束
}];
相关推荐
所以unity代码或者资源没有改变并且需要打多个渠道或者不同参数的渠道包的时候,只需要导出一次xcode工程即可,通过外部的自动配置工具进行xcode工程的各种
Xcode iOS11.0版本的配置包 给需要真机调试iOS11.0系统版本手机又不想升级Xcode的童鞋 为什么会有摘要必须大于100字节这种逆天的设定!!!
xcode ios11.4 配置文件 ,放入路径/应用程序/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport/就可以支持11.4的系统进行编译
svn+xcode配置, 配置后,方便代码的提交与更新。
下载解压放到/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport即可,重启Xcode即可,无需升级系统和Xcode
Xcode iOS9.3 配置包 could not find developer disk image
最全的【Xcode】配置包iOS12.0 could not find developer disk image
配置Xcode版本控制SVN详细步骤.内容比较清楚
本人亲测,绝对好用! Xcode添加路径 将下载好的10.2文件解压复制: /applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport 文件夹下。
xcode6.4+iOS8 根据masonry 自己小小修改的 tableViewCell 自适应高度的优化
Step up your iOS development with the power and wealth of features of Xcode 7 About This Book Updated for the latest Xcode 7 release, this is the first book that will show you how to use all the new...
关于xcode7真机测试出现 could not find developer disk image 问题,主要缺少了此文件夹,将其放到 /Applications/Xcode7.0.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport 目录下就OK了.
xcode7_mexopts.zip
xcode 配置包路径 /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport
Xcode 相关配置,文件模板,代码片段
xcode配置iOS10.3开发包
最新xcode适配ios11.2配置文件最新xcode适配ios11.2配置文件
iOS10.3 xcode